Digital Clamp Meter Uni-Trend UT203
This is high quality clamp meter. Digital clamp meter UNI-T UT203 is a reliable and low consumption clamp multimeter. Digital clamp meter UNI-T UT203 measures AC/DC voltage and current, resistance, frequency, duty cycle, also performing diode check and continuity test. This clamp meter has overload protection. •Measuring functions: ◦AC/DC voltage ◦AC/DC current ◦Resistance ◦Temperature ◦Diode
This is high quality clamp meter.
Digital clamp meter UNI-T UT203 is a reliable and low consumption clamp multimeter. Digital clamp meter UNI-T UT203 measures AC/DC voltage and current, resistance, frequency, duty cycle, also performing diode check and continuity test.
This clamp meter has overload protection. •Measuring functions: ◦AC/DC voltage ◦AC/DC current ◦Resistance ◦Temperature ◦Diode check ◦Continuity test ◦Duty cycle •Auto ranging •Data hold function •Display “REL” mode •Sleep mode •Low battery display •28 mm maximum jaw diameter •Measurement update speed 3 times/second •Compact and comfortable design •Compliance with safety requirements IEC 61010 CAT II 600 V, CAT III 300 V Specifications:
DC voltage Range 400 mV / 4 V / 40 V / 400 V / 600 V
AC voltage Range 4 V / 40 V / 400 V / 600 V
DC current Range 40 A / 400 A
AC current Range 40 A / 400 A
Frequency Range 10 Hz / 100 Hz / 1 kHz / 10 kHz / 1 MHz
Included:
UT203 Meter
Test Leads
User’s Manual
Product Features
- DC voltage Range 400 mV / 4 V / 40 V / 400 V / 600 V
- AC voltage Range 4 V / 40 V / 400 V / 600 V
- DC current Range 40 A / 400 A
- AC current Range 40 A / 400 A
- Frequency Range 10 Hz / 100 Hz / 1 kHz / 10 kHz / 1 MHz
I really like it! I am using the UT203 clamp meter to diagnose a parasitic drain in my car. I like it (the clamp meter, not the parasitic drain). The meter works well, looks nice, has a nice case, and wasn’t all that expensive.The UT203 is pretty simple, does not try to do a whole bunch of things, is somewhat limited, but does the DC amps (which is what I need), and is pretty easy to use. I made a loop of wire, looping the wire eight times, so the DC amps is multiplied eight times. It also works…
Brilliant little meter, tougher than most, DC clamp I’ve had this meter for about 6 months. Originally bought it to measure DC current in my two smallish solar installations. The clamp-on action is a lot easier than accessing the conductor, so you can run over all the wires in a minute looking for energy leaks or verifying current flow. The amperages in our 1000 to 2000 watt installations can run around 70 A and I found that my other multimeters couldn’t handle this amperage and regularly blew fuses or just blew up. This little meter, being…
Great When It Works I wasn’t expecting this to be the best meter since the price was on the lower end.When it works everything seems to be fine. A few times it refuses to register anything when I clamp it around wires. I know it is not the wires because sometimes it works and sometimes it doesn’t.I like that it came with a nice carrying case.Also it is great how everything is pretty simple on it and has just the useful functions that an everyday joe would use apposed to a ton of…